Removing the cylinder head
1. Check that the camshaft dowel pin hole
a is in the position shown in the illustra-
tion. Adjust if necessary.
2. Remove the cylinder head cover bolts in
the sequence shown.
3. Remove the cylinder head bolts in the
sequence shown.
62Y5A11
S62Y5260
CAUTION:
Do not scratch or damage the mating sur-
faces of the cylinder head and cylinder
body.
4. Remove the oil pump 1, rocker arm
assembly 2, and rocker arm shaft 3.
Cylinder head
3
2
1
2
3
4
5
6
7
8
9
S62Y5276
5-24