Please Note While Programming - HEIDENHAIN TNC 620 User Manual

Hide thumbs Also See for TNC 620:

Table of Contents

Cycles: Special Functions

11.7 FACE MILLING (Cycle 232, DIN/ISO: G232)

Please note while programming:

Enter the 2nd set-up clearance in Q204 so that no

collision with the workpiece or the fixtures can occur.

If the starting point in the 3rd axis Q227 and the

end point in the 3rd axis Q386 are entered as equal

values, the TNC does not run the cycle (depth = 0

has been programmed).

Program Q227 greater than Q386. Otherwise, the

TNC will display an error message.

HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015