HEIDENHAIN TNC 620 User Manual page 5

TNC model, software and features
This manual describes functions and features provided by TNCs as
of the following NC software numbers.
TNC model
TNC 620
TNC 620 E
TNC 620 Programming Station
The suffix E indicates the export version of the TNC. The export
version of the TNC has the following limitations:
Simultaneous linear movement in up to 4 axes
The machine tool builder adapts the usable features of the TNC to
his machine by setting machine parameters. Some of the functions
described in this manual may therefore not be among the features
provided by the TNC on your machine tool.
TNC functions that may not be available on your machine include:
Tool measurement with the TT
Please contact your machine tool builder to become familiar with
the features of your machine.
Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the TNCs. We recommend these courses
as an effective way of improving your programming skill and
sharing information and ideas with other TNC users.
User's Manual:
All TNC functions that have no connection with
cycles are described in the User's Manual of the TNC
620. Please contact HEIDENHAIN if you require a
copy of this User's Manual.
ID of User's Manual for conversational programming:
1096883-xx.
ID of User's Manual for DIN/ISO programming:
1096887-xx.
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
TNC model, software and features
NC software number
817600-03
817601-03
817605-03
5