3
Fixed Cycles: Drilling
3.1
Fundamentals
3.1
Fundamentals
Overview
The TNC offers the following cycles for all types of drilling
operations:
Soft key
Cycle
240 CENTERING
With automatic pre-positioning, 2nd
set-up clearance, optional entry of the
centering diameter or centering depth
200 DRILLING
With automatic pre-positioning, 2nd
set-up clearance
201 REAMING
With automatic pre-positioning, 2nd
set-up clearance
202 BORING
With automatic pre-positioning, 2nd
set-up clearance
203 UNIVERSAL DRILLING
With automatic pre-positioning, 2nd
set-up clearance, chip breaking, and
decrementing
204 BACK BORING
With automatic pre-positioning, 2nd
set-up clearance
205 UNIVERSAL PECKING
With automatic pre-positioning, 2nd
set-up clearance, chip breaking, and
advanced stop distance
208 BORE MILLING
With automatic pre-positioning, 2nd
set-up clearance
241 SINGLE-LIP D.H.DRLNG
With automatic pre-positioning to
deepened starting point, shaft speed
and coolant definition
70
Page
71
73
75
77
80
83
86
90
93
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015