HEIDENHAIN TNC 620 User Manual page 420

15
Touch Probe Cycles: Automatic Workpiece Inspection
15.12 MEASURE BOLT HOLE CIRCLE (Cycle 430, DIN/ISO: G430)
Tolerance for center 2nd axis Q280: Permissible
position deviation in the minor axis of the working
plane. Input range 0 to 99999.9999
Measuring log Q281: Define whether the TNC
should create a measuring log:
0: Do not create a measuring log
1: Create a measuring log: The TNC saves the
file TCHPR430.TXT
TNC:\.
2: Interrupt program run and output measuring log
to the TNC screen. Resume program run with NC
Start.
PGM stop if tolerance error Q309: Definition of
whether in the event of a violation of tolerance
limits the TNC is to interrupt program run and output
an error message:
0: Do not interrupt program run, do not output an
error message
1: Interrupt program run and output an error
message
Tool for monitoring Q330: Definition of whether
the TNC is to monitor for tool breakage (see "Tool
monitoring", page 388). Input range 0 to 32767 .9,
alternatively tool name with up to 16 characters.
0: Monitoring inactive
>
420
as standard in the directory
0: Tool number in the tool table TOOL.T
log
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
Q280=0.15 ;TOLERANCE 2ND
CENTER
Q281=1 ;MEASURING LOG
Q309=0 ;PGM STOP IF ERROR
Q330=0 ;TOOL