Cycle Parameters - HEIDENHAIN TNC 620 User Manual

7
Fixed Cycles: Contour Pocket
7.7 FLOOR FINISHING (Cycle 23, DIN/ISO: G123)

Cycle parameters

Feed rate for plunging Q11: Traversing speed of
the tool when plunging into the workpiece in mm/
min. Input range 0 to 99999.9999 alternatively
FAUTO, FU, FZ
Feed rate for milling Q12: Traversing speed of
the tool in the working plane. Input range 0 to
99999.9999, alternatively FAUTO, FU, FZ
Retraction feed rate Q208: Traversing speed of
the tool in mm/min when retracting after machining.
If you enter Q208 = 0, the TNC retracts the tool at
the feed rate in Q12. Input range 0 to 99999.9999,
alternatively FMAX,FAUTO
204
NC blocks
60 CYCL DEF 23 FLOOR FINISHING
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
Q11=100 ;FEED RATE FOR
PLNGNG
Q12=350 ;FEED RATE FOR
MILLING
Q208=9999;RETRACTION FEED
RATE