Please Note While Programming; Cycle Parameters - HEIDENHAIN TNC 620 User Manual

Hide thumbs Also See for TNC 620:

Table of Contents

Please note while programming:

If you work in a tilted system with Cycle 8 the

following procedure is recommended:

program the tilting movement and

Cycle 8 MIRRORING!

Mirrored axis?: Enter the axis to be mirrored. You

can mirror all axes except for the spindle axis—

including rotary axes—with the exception of the

spindle axis and its associated auxiliary axis. You can

enter up to three axes. Input range: Up to three NC

axes X, Y, Z, U, V, W, A, B, C

HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015

MIRRORING (Cycle 8) 10.5

79 CYCL DEF 8.0 MIRROR IMAGE

80 CYCL DEF 8.1 X Y Z