HEIDENHAIN TNC 620 User Manual page 423

3rd meas. point 1st axis Q296 (absolute):
Coordinate of the third touch point in the reference
axis of the working plane. Input range -99999.9999
to 99999.9999
3rd meas. point 2nd axis Q297 (absolute):
Coordinate of the third touch point in the minor axis
of the working plane. Input range -99999.9999 to
99999.9999
3rd meas. point 3rd axis Q298 (absolute):
Coordinate of the third touch point in the touch
probe axis. Input range -99999.9999 to 99999.9999
Set-up clearance Q320 (incremental): Additional
distance between measuring point and ball tip.
Q320 is added to SET_UP (touch probe table). Input
range 0 to 99999.9999
Clearance height Q260 (absolute): Coordinate in
the touch probe axis at which no collision between
touch probe and workpiece (fixtures) can occur.
Input range -99999.9999 to 99999.9999
Measuring log Q281: Define whether the TNC
should create a measuring log:
0: Do not create a measuring log
1: Create a measuring log: The TNC saves the
file TCHPR431.TXT
TNC:\.
2: Interrupt program run and output measuring log
to the TNC screen. Resume program run with NC
Start.
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
MEASURE PLANE (Cycle 431, DIN/ISO: G431) 15.13
as standard in the directory
NC blocks
5 TCH PROBE 431 MEASURE PLANE
Q263=+20
Q264=+20
Q294=-10
Q265=+50
Q266=+80
Q295=+0
Q296=+90
Q297=+35
Q298=+12
Q320=0
Q260=+5
Q281=1
log
;1ST POINT 1ST AXIS
;1ST POINT 2ND AXIS
;1ST POINT 3RD AXIS
;2ND POINT 1ST AXIS
;2ND POINT 2ND AXIS
;2ND POINT 3RD AXIS
;3RD POINT 1ST AXIS
;3RD POINT 2ND AXIS
;3RD POINT 3RD AXIS
;SET-UP CLEARANCE
;CLEARANCE HEIGHT
;MEASURING LOG
423
15