Cycle Parameters - HEIDENHAIN TNC 620 User Manual

4
Fixed Cycles: Tapping / Thread Milling
4.7 THREAD MILLING/COUNTERSINKING (Cycle 263, DIN/ISO:G263)

Cycle parameters

Nominal diameter Q335: Nominal thread diameter.
Input range 0 to 99999.9999
Thread pitch Q239: Pitch of the thread. The
algebraic sign differentiates between right-hand and
left-hand threads:
+
–= left-hand thread
Input range -99.9999 to 99.9999
Thread depth Q201 (incremental): Distance
between workpiece surface and root of thread.
Input range -99999.9999 to 99999.9999
Countersinking depth Q356 (incremental):
Distance between tool tip and the top surface of the
workpiece. Input range -99999.9999 to 99999.9999
Feed rate for pre-positioning Q253: Traversing
speed of the tool when moving in and out of the
workpiece, in mm/min. Input range 0 to 99999.9999
alternatively FMAX, FAUTO
Climb or up-cut Q351: Type of milling operation
with M3
+1
–1
machining)
Set-up clearance Q200 (incremental): Distance
between tool tip and workpiece surface. Input range
0 to 99999.9999
Set-up clearance to the side Q357 (incremental):
Distance between tool tooth and the wall of the
hole. Input range 0 to 99999.9999
Depth at front Q358 (incremental): Distance
between tool tip and the top surface of the
workpiece for countersinking at front. Input range
-99999.9999 to 99999.9999
Countersinking offset at front Q359 (incremental):
Distance by which the TNC moves the tool center
away from the hole center. Input range 0 to
99999.9999
118
= right-hand thread
= Climb
= Up-cut (If you enter 0, climb milling is used for
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015