PRESET COMPENSATION (Cycle 452, DIN/ISO: G452, option)
Logging function
After running Cycle 452, the TNC creates a measuring log
(TCHPR452.TXT)
containing the following information:
Creation date and time of the log
Path of the NC program from which the cycle was run
Active kinematic number
Entered calibration sphere radius
For each measured rotary axis:
Starting angle
End angle
Angle of incidence
Number of measuring points
Dispersion (standard deviation)
Maximum error
Angular error
Averaged backlash
Averaged positioning error
Measuring circle radius
Compensation values in all axes (preset shift)
Measurement uncertainty of rotary axes
Notes on log data
(see "Logging function", page 463)
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
17
17.5
473