HEIDENHAIN TNC 620 User Manual page 13

New and changed cycle functions of
software 81760x-03
New cycle 258 POLYGON STUD (software option 19)see
"CIRCULAR STUD (cycle 258, DIN/ISO: G258, software option
19)", page 163
In cycle 247: SET DATUM, the datum point can be selected
from the preset table, see "DATUM SETTING (Cycle 247 , DIN/
ISO: G247)", page 261
In the cycles 200 and 203 the behavior of the dwell time was
adjusted, see "UNIVERSAL DRILLING (Cycle 203, DIN/ISO:
G203, software option 19)", page 80
Cycle 205 performs deburring on the coordinate surface, see
"UNIVERSAL PECKING (Cycle 205, DIN/ISO: G205, software
option 19)", page 86
In SL cycles, M110 is now accounted for compensated inner
arcs if activated during machining see "SL Cycles", page 188
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
New and changed cycle functions of software
13