15
Touch Probe Cycles: Automatic Workpiece Inspection
15.4 MEASURE ANGLE (Cycle 420, DIN/ISO: G420)
Measuring log Q281: Define whether the TNC
should create a measuring log:
0: Do not create a measuring log
1: Create a measuring log: The TNC saves the
file TCHPR420.TXT
TNC:\.
2: Interrupt program run and output measuring log
to the TNC screen. Resume program run with NC
Start.
394
as standard in the directory
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
log