Power Supply Specification; Performance Specification - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U
3.2

Power Supply Specification

External power
supply
Internal power
supply
3.3

Performance Specification

Item
Number of control axes
Backup
No. of occupied I/O points
Connectable servo amplifier
Servo bus
Scan cycle
Control input
Parameter
Control data
Monitor data
Positioning program
Method
Unit
Unit magnification
Positioning range
Speed command
Positioning
Acceleration/
deceleration
process
Starting time
Interpolation
function
20
Item
Power supply voltage 24V DC +20% -15% Ripple (p-p) within 5%
Permitted instantaneous
Operation continues when the instantaneous power failure is shorter than 5ms.
power failure time
Powerconsumption 5W
Power fuse 1A
PLC power supply 100mA /5V DC
2 axes
Positioning parameters, servo parameters, and table information can be saved to flash memory
Write count: Maximum 100,000 times
8 points (input or output, whichever may be counted)
MELSERVO MR-J3- B
Maximum 2 amplifiers can be connected
Standard cord length:
Long distance cord length:
SSCNET III
1.77ms
Interrupt input:
DOG:
START input:
Manual pulse generator:
Positioning parameter:
Servo parameter:
17 types
26 types
Created by sequence programs (using FROM/TO instruction, etc.)
Direct operation (1 for X and Y axes respectively)
Table operation (300 tables for X, Y, and XY axes respectively)
Increment/Absolute
-4
PLS,µm, 10 inch, mdeg
1, 10, 100, and 1000-fold
-2,147,483,648 to 2,147,483,647 PLS
Hz, cm/min, 10deg/min, inch/min
Trapezoidal acceleration/deceleration, S-pattern acceleration/deceleration: 1 to 5,000ms
Only trapezoidal acceleration/deceleration is available for interpolation
1.6ms or less
2-axes linear interpolation, 2-axes circular interpolation
Specification
Specification
Station to station maximum 20m (65'7")
Station to station maximum 50m (164')
2 inputs (INT0 and INT1) per axis
1 input per input axis
1 input per axis
1 input per axis (A/B-phase)
21 types
50 types
3 Specifications
3.2 Power Supply Specification