Mitsubishi FX3U-20SSC-H User Manual page 96

FX -20SSC-H Positioning Block User's Manual
3U
Control data
Operation pattern selection
Table Information
For details on the table operation, refer to the following.
Operation information
Position (address) data
Speed information
*1. For details on the units, refer to the following.
90
Item
BFM #520 b0
9.12 Parameter, Control Data, Monitor Data and Table
BFM Number
X-axis Y-axis
BFM #620 b0
Refer to Section 11.5
9 Positioning Control
Description
Select motion patterns.
b0 : 1-speed positioning operation
b1 : Interrupt 1-speed constant quantity
feed
b2 : 2-speed positioning operation
b3 : Interrupt 2-speed constant quantity
feed
b4 : Interrupt stop
b5 : Variable speed operation
b6 : Manual pulse generator operation
b7 : Linear interpolation operation
b8 : Linear interpolation (interrupt stop)
operation
b9 : Table operation (individual)
b10: Table operation (simultaneous)
→ Refer to Chapter 10 and Section 11.5
Set operation information.
→ Refer to subsection 10.1.3
Set the target address.
Setting range: -2,147,483,648 to
2,147,483,647
*1
(user unit)
Set the operation speed.
Setting range: 1 to 50,000,000
*1
(user unit)
→ Refer to Section 7.7