[Setting example] Changing the SV (Front SV) to SV1
Display
PV indication
SV indication
PV indication
1.800.561.8187
1.
Press and hold the
SEL
will be displayed.
2.
Press the
key to display
3.
SEL
Press the
key once.
The current setting ( ) will be displayed.
4.
Press the
or
5.
Press the
SEL
key once.
(Repeat the procedure from 3 to 5 to check the set value.)
6.
Short-circuit the Di1 terminals. The SV will be changed from the front SV to SV1.
7.
If you want to display the operation status, press and hold the
value and SV No. will appear alternately.
The switched SV or
If unoperated state continues, the PV will be displayed.
www.
Operating procedure
key for five seconds.
.
keys to flicker and to display .
will be displayed and 1 will be registered for
will be displayed alternately on the display area.
.com
SEL
key for two seconds. The SV
information@itm.com
.
69