2-3 Parameter functions and method of settings
Method of setting the SV (Setting value)
[Description]
• The SV is a target value for control.
• Any SV that is outside of the range set in the parameters
of
(lower limit) and
third block cannot be set. (See page 54.)
[Setting example] Changing the SV from 250°C to 1195°C
Display
1.
SV
2.
SV
1.800.561.8187
14
(upper limit) of the
Press the
or
keys to display
will be registered in the SV (SV0) in three seconds. After that, the controller will operate
with the SV being 1195.
www.
Related parameters:
Operating procedure
.
.com
(page 54)
(page 54)
information@itm.com