Output Limit Types - FE PXR4 Operation Manual

[Description]
• This parameter sets whether or not to maintain the value
within the limit when the output value increases up to the
limit set value.
Output value
(beyond the limit)
[Setting example] Selecting the operation that outputs 1 and 2 are maintained within the upper and lower limits
Display
1.800.561.8187
Output limit types (Setting range: 0 to 15)
103%
Breaking the limit
PHC
Limit
PLC
Breaking the limit
PHC
Output value
PLC
(under the limit)
-3%
1.
Press and hold the
will be displayed on the PV display.
2.
Press the key to display
3.
Press the SEL key once.
The current setting ( ) flashes on the SV display.
4.
Press the or
5.
Press the SEL key once.
controller will operate with outputs 1 and 2 maintained within the upper and lower limits.
6.
If you want to display the operation status, press and hold the
www.
Limit
Operating procedure
key for five seconds.
SEL
.
keys to display .
will stop flashing and will be registered for
.com
Output 1
PCUT
Upper limit Lower limit
0 103% -3%
1 Limit
103%
2 -3%
Limit
3 Limit Limit
4 103% -3%
5 Limit
103%
-3%
6 Limit
7 Limit Limit
8 -3%
103%
9 Limit
103%
10 Limit -3%
11 Limit Limit
12 -3%
103%
Limit
13 103%
14 Limit -3%
15 Limit
Limit
SEL key for two seconds.
information@itm.com
Output 2
Upper limit Lower limit
103% -3%
-3%
103%
-3%
103%
103% -3%
103% Limit
Limit
103%
Limit
103%
103% Limit
-3%
Limit
-3%
Limit
Limit -3%
Limit -3%
Limit
Limit
Limit
Limit
Limit Limit
Limit
Limit
. After that, the
63