[Setting example] Setting the delay time for ON-delay alarm to 30 seconds
Display
1.
2.
3.
4.
5.
6.
1.800.561.8187
56
Press and hold the
key for five seconds.
SEL
will be displayed on the PV display.
Press the
key to display
Press the
SEL
key once.
The current setting ( ) flashes on the SV display.
Press the
or
keys to display
Press the
SEL
key once.
controller will operate with the ON-delay alarm being 30 seconds.
If you want to display the operation status, press and hold the
www.
Operating procedure
.
.
will stop flashing and will be registered for
.com
. After that, the
key for two seconds.
SEL
information@itm.com