Output Value Display - FE PXR4 Operation Manual

,
[Description]
• These parameters display the output values of outputs 1
and 2 in the unit of %. (Since the values are calculated
with the software, they may have some error comparing
to the actual output.)
[Setting example] Confirming the output value (the calculated value) of control output 1
Display
1.
2.
3.
1.800.561.8187
64
Output value display (Display only: -3.0 to 103.0%)
Press and hold the SEL key for five seconds.
will be displayed on the PV display.
Press the key to display
The output value will appear in the SV display.
If you want to display the operation status, press and hold the
www.
Operating procedure
.
.com
key for two seconds.
SEL
information@itm.com