Integral Time - FE PXR4 Operation Manual

[Description]
• can be set automatically by the auto-tuning operation.
• can also be set manually.
[Setting example] Changing the integral time from 240 seconds to 600 seconds
Display
1.800.561.8187
Integral time (Setting range: 0 to 3200 seconds)
1.
Press and hold the
will be displayed on the PV display.
2.
Press the key to display
3.
Press the key once.
SEL
The current setting (
4.
Press the or
5.
Press the SEL key once.
controller will operate with
6.
If you want to display the operation status, press and hold the
www.
• When
• When
tive.
Operating procedure
key for three seconds.
SEL
.
) flashes on the SV display.
keys to display .
will stop flashing and will be registered for
being seconds.
.com
is set to 0, the integral operation does not start.
is set to 0.0, this makes the setting of
SEL key for two seconds.
information@itm.com
ineffec-
. After that, the
25