FE PXR4 Operation Manual page 41

[Setting example] Changing the measuring range from 0°C to 150°C to -100°C to 200°C (Pt100)
Display
1.800.561.8187
1.
Press and hold the
SEL
will be displayed on the PV display.
2.
Press the key to display
3.
Press the SEL key once.
The current setting ( ) flashes on the SV display.
4.
Press the or
5.
Press the key once.
SEL
6.
Press the key to display
7.
Press the SEL key once.
The current setting (
8.
Press the or
9.
Press the SEL key once.
with the measured range being -100°C to 200°C.
10.
If you want to display the operation status, press and hold the
www.
Operating procedure
key for three seconds.
.
key to display .
will stop flashing and will be registered for
on the PV display.
) flashes on the SV display.
key to display .
will be registered for
.com
. After that, the controller will operate
SEL key for two seconds.
information@itm.com
.
41