Sv (Setting Value) Offset - FE PXR4 Operation Manual

SV (Setting value) offset (Setting range: -50 to 50%FS)
[Description]
• With this function, predetermined value is added to the origi-
nal SV. This parameter is used to eliminate the offset that
occurs in performing P control.
• The PXR operates based on the SV to which the SV offset
value is added.
[Setting example] Adding the SV offset value of 9°C to the currently set value
Display
1.
2.
3.
4.
5.
6.
1.800.561.8187
44
Press and hold the key for three seconds.
SEL
will be displayed on the PV display.
Press the key to display
Press the
SEL key once.
The current setting ( ) flashes on the SV display.
Press the or key to display .
Press the SEL key once.
SV remains unchanged.) After that, the controller will operate at the SV value to which the SV
offset value of 9°C is added.
If you want to display the operation status, press and hold the
www.
• Alarm judgment is made by the displayed SV to which
the SV offset value is not added.
Operating procedure
.
will stop flashing and will be registered for
.com
. (The displayed
key for two seconds.
SEL
information@itm.com