D1Cb mounting
3
D1Cb mounting
User qualification, mechanical
n
mounting: trained qualified personnel,
Ä Chapter 1.2 'Users' qualifica‐
see
tions' on page 10
User qualification, electrical installa‐
n
tion: Electrical technician, see
Ä Chapter 1.2 'Users' qualifications'
on page 10
NOTICE!
Mounting position and conditions
–
Ensure that there is unimpeded
access for operation
–
Secure, low-vibration fixing
–
Avoid direct sunlight
–
Permissible ambient temperature
at fixing position: 0 ... 50 °C at
max. 95 % relative air humidity
(non-condensing)
22
NOTICE!
Material damage to electrostatically
sensitive components
Components can be damaged or
destroyed by electrostatic voltages.
–
Before any work, on electrostati‐
cally sensitive components, dis‐
connect the power supply.
–
When working on electrostatically
sensitive components, wear an
earthed anti-static wrist band.
–
Always hold components by their
corners and never touch conduc‐
tors, ICs, etc.
–
Only place components on anti-
static supports or the original
packaging.
Ablese- und Bedienposition
Das Gerät in einer günstigen
–
Ablese- und Bedienposition
(möglichst in Augenhöhe) mon‐
tieren
Montageposition
Ausreichend Freiraum für die
–
Kabel vorsehen
Für die 'Parkstellung' des
–
Reglers, nach oben mindestens
120 mm Platz freihalten