NOTICE!
Correct sensor operation
Damage to the product or its sur‐
roundings
–
Correct measuring and dosing is
only possible if the sensor is
working perfectly
–
Check and calibrate the sensor
regularly
NOTICE!
Compensation of control deviations
Damage to the product or its sur‐
roundings
–
This controller cannot be used in
control circuits which require
rapid compensation (< 30 s)
1.4
Correct and proper use
NOTICE!
Compensation for control deviations
Damage to the product or its sur‐
roundings
–
The controller can be used in pro‐
cesses, which require compensa‐
tion of > 30 seconds
NOTICE!
Correct and proper use
The unit is intended to measure and
regulate liquid media. The marking of
the measured variables is located on
the controller and is absolutely
binding.
The unit may only be used in accord‐
ance with the technical details and
specifications provided in this oper‐
ating manual and in the operating
manuals for the individual compo‐
nents (such as, for example, sensors,
fittings, calibration devices, metering
pumps etc.).
Any other uses or modifications are
prohibited.
Introduction
13