Operating diagram/ Display Symbols
6.6
Operating diagram
Access code
Access to the setting menu can be blocked with an access code
–
If the access code has been correctly selected for a setting menu, then all of the
–
other setting menus are also accessible
Fundamentally the continuous displays 1 - 3 and the calibration menu are freely
accessible. All of the other menus can be disabled by the access code in such a
way that the set values are displayed but cannot be changed. The default value
of the access code is "5000".
If no key is pressed within 60 seconds, the device will return to the continuous
–
display 1, the access code is re-enabled and access is restricted
64