Table of Contents
Advertisement
Measured Variables and Operating Menus for Amperometric Sensors
7.1
Reduced / Complete Operating Menu
The DULCOMETER
hensive menus (reduced / complete). All of the parameters of the controller are preset
and can be changed in the complete operating menu.
The controller is delivered with a restricted operating menu. If adjustments are neces‐
sary, the parameters can be changed by switching to the complete operating menu.
general setting
information
Fig. 35: Reduced / complete changeover
7.2
Description of All Amperometric Measured Variables
WARNING!
Danger of incorrect metering
This can result in hazardous incorrect metering
During initial commissioning, the measured variable and the measuring range of the
sensor must be set prior to calibration. Refer to
Measured Variable and Measuring Range' on page 54
Measured variable
Chlorine, chlorine dioxide, ozone
Bromine
Oxygen
Peracetic acid
Hydrogen peroxide
Chlorite
70
®
D1Cb / D1Cc allows settings to be made in two different compre‐
Identcode:
D1CB xxxxxxxxxx
Vxxxxxxxxxx
Srnr: xxxxxxxxxxx
alarm relay
operating menu
Calib timer
wash timer
Ä Chapter 5.1.2 'Selection of the
Default measuring range
2 ppm
10 ppm
20 ppm
2000 ppm
200 ppm
0.5 ppm
operating menu
_
reduced
_
english
5000
access c.:
A0088_GB
Advertisement
Table of Contents
