Table of Contents
Advertisement
Measured Variables and Operating Menus for Amperometric Sensors
7.4
Complete Operating Menu / Description of All Measured Variables
The complete operating menu allows all controller parameters to be set. The following
overview shows the settings that can be selected:
0.60
auto.:
30.0°C
mea. val 0.60 ppm
feed fwd:
ctrlout:
w= 0.60 ppm
0.60 ppm
0.0
calibration
zero p.:
4.0 mA
slope:
6.50 mA/ppm
measured value
setting ?
correcting value
setting ?
pumps
setting ?
relay
setting ?
limits
setting ?
Fig. 37: Complete operating menu
Permanent display 1
ppm
Permanent display 2
70 %
only with control
59 %
(w = setpoint)
Permanent display 3
10.0
Only with
temperature
correction
Only with pumps
Only with limit value-,
or solenoid relay
Only with control
control
setting ?
Only with
pause / feedfwd:
setting ?
feed forward control
Only with
mA -output
setting ?
mA output
general setting
information
A0017_GB
73
Advertisement
Table of Contents
