Part Vi Operation; Starting The Vision Mov Ui Spooler - Vision 5 Series User Manual

52 Vision Series 5 Controller User Manual
6 Operation
6.1

Starting the Vision Mov UI spooler

The Vision Mov UI spooler program must be running and connected before proceeding.
The Vision Mov UI program should start automatically after the program is installed and when the
computer is restarted. The screen below will appear when it is running.
If it is not running, select the Vision Mov UI icon from the Windows desktop.
Select the Machine in the "Machines Discovered on Network" screen by clicking on it and then click
Select.
© 2019 Vision Engraving Systems