4.18 Fluorescent Lamp
4.18.11
Disassembling the 15.0 Inch SXGA+ Samsung Fluorescent Lamp
CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD module. Be careful not to let dust or other foreign
substances into the LCD module.
To disassemble the 15.0 inch SXGA+ Samsung fluorescent lamp, follow the steps below and
refer to Figures 4-144 to 4-152.
1. Remove the PCB cover (source and gate parts) and aluminum tape.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
Replacing the 15.0 Inch SXGA+ Samsung Fluorescent Lamp
NOTE: Be careful not to damage the COF.
Figure 4-144 Replacing 15.0 Inch Samsung fluorescent lamp (SXGA+) (1)
manuals search engine
4 Replacement Procedures
PCB cover
Aluminum tape
4-139