Page 1 Satellite A10/A15 Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 196 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 2 If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
Page 3: Fcc Notice
ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Page 4: Industry Canada Requirement
Only peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit’...
Page 5: Type Of Service
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
Page 6 date and time it is sent and an identification of the business, other entity or individual sending the message and the telephone number of the sending machine or such business, other entity or individual. In order to program this information into your fax modem, you should complete the setup for your fax software before sending a message.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.
Page 10 L’utilisation en extérieur est autorisé sur le canal 10 (2457 MHz) et 11 (2462 MHz). Dans le cas d’une utilisation privée, a l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à...
Page 11 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 12 High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. The above Caution information applies to products that operate with an 802.11a device.
Page 13: Device Authorization
The interference range of this equipment is less than 40m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: Toll Free Tel: Direct Dial:...
Page 14: Interference Statement
❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of...
Page 15 The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. The following information is dependent on what type of wireless device is in your computer. Approved Countries/Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 16 802.11a (5GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 17: Bluetooth Wireless Technology Interoperability
Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support Austria...
Page 18: Bluetooth Wireless Technology And Your Health
LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth™ cards from TOSHIBA, always change the frequency, move your PC to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your PC.
Page 19: Regulatory Statements
The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 20 The Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the Bluetooth™ Card from TOSHIBA in such a manner that human contact during normal operation is minimized. Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’...
Page 21 The interference range of this equipment is less than 10m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: Toll Free Tel: 10:00 – 17:00...
Page 22 Direct Dial: Fax: Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan. The Name of the radio equipment: EYXF2CS TELECOM ENGINEERING CENTER Approval Number: 01NYDA1305 The following restrictions apply:...
Page 23 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 24 Sony Corporation. LapLink is a registered trademark of Traveling Software, Inc. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 25 Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. PS/2 is a registered trademark of IBM, Inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Computer Disposal Information This product contains mercury.
Page 26: Table Of Contents
Contents Introduction ...34 This guide ... 34 Safety icons ... 35 Other icons used... 36 Other documentation ... 36 Service options ... 37 Chapter 1: Finding Your Way Around ... 38 Making sure you have everything ... 38 Front with the display closed ... 39 Back ...
Page 27 Keeping yourself comfortable ... 49 Precautions... 52 Setting up your computer ... 54 Setting up your software... 54 Registering your computer with Toshiba ... 55 Adding external devices ... 55 Connecting to a power source ... 56 Charging the main battery... 58 Using the computer for the first time ...
Page 28 Contents Chapter 3: Learning the Basics ... 79 Computing tips ... 79 Using the keyboard ... 80 Character keys ... 81 Ctrl, Fn, and Alt keys ... 81 Function keys... 81 Windows Overlay keys... 82 Emulating a full-size keyboard ... 84 Starting a program...
Page 29 Going into Standby mode more quickly ... 111 Starting again from Standby ... 114 Chapter 4: Mobile Computing ... 115 Toshiba’s energy-saver design ... 115 Running the computer on battery power ... 115 Battery Notice ... 116 Power management ... 116 Charging the batteries...
Page 30 Contents Lesson 2: Using the TouchPad and control buttons together ... 133 Lesson 3: Learning about the Internet ... 136 Lesson 4: Creating a new document ... 137 Lesson 5: Creating a new folder... 138 Lesson 6: Starting programs ... 140 Lesson 7: Resizing, repositioning, and hiding windows ...
Page 31 Surfing the Internet... 173 Internet features... 174 Uploading and downloading files on the Internet ... 174 Toshiba’s online resources... 175 Exploring video features ... 175 Changing the display properties setting ... 175 Display settings hot key ... 176 Exploring audio features ... 177 Recording sounds...
Page 32 Contents Hot swapping... 182 Chapter 7: Toshiba Utilities ... 183 TOSHIBA Accessibility ... 183 Fn-esse ... 185 Starting Fn-esse... 185 Assigning a key to a program or document ... 186 Viewing existing key assignments... 188 Changing or removing Hotkey utility ... 188 TOSHIBA Console ...
Page 33 Develop good computing habits ... 222 If you need further assistance... 223 Before you call ... 223 Contacting Toshiba ... 224 Other Toshiba Internet Web sites ... 225 Toshiba’s worldwide offices ... 225 Appendix A: Hot Keys... 228 Volume Mute... 228 Instant password security...
Page 34: Introduction
XP, already installed on your computer. Your operating system offers exciting features and easy Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.
Page 35: Safety Icons
If you are new to computers, or have not used a notebook computer before, read through the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most.
Page 36: Other Icons Used
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery Media. ❖ For accessory information, visit Toshiba's Web site at toshiba.com ❖ The Microsoft which explains the features of the operating system.
Page 37: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ limited warranty programs. For more information, visit Toshiba’s Web site at toshiba.com If you have a problem or need to contact Toshiba, see “If...
Page 38: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 39: Front With The Display Closed
Finding Your Way Around Front with the display closed Front with the display closed Volume control dial Display latch System indicator panel Wireless antenna on/off switch* Wireless antenna LED * functional only on systems with a wireless module installed The volume control dial lets you adjust the sound on your computer.
Page 40: Back
Finding Your Way Around Back Back Speaker Security lock slot DC-IN Network port The speaker lets you hear sounds, such as system alarms associated with your software, and music from DVD-ROMs and audio CDs. The security lock slot allows you to attach an optional PORT- Noteworthy for securing it to a large, heavy object, such as your desk.
Page 41: Right Side
The USB (Universal Serial Bus) ports allow you to connect USB peripherals to your computer. DEFINITION: USB is a peripheral expansion standard for peripherals such as keyboards, pointing devices, and monitors. USB peripherals have a single standard for cabling and connectors. The USB standard allows hot swapping of peripherals.
Page 42: Left Side
Finding Your Way Around Left side line. For more information, see phone line” on page Left side Cooling vent The cooling vent prevents the computer’s central processing unit (CPU) from overheating so that it can continue to perform at maximum speed. To prevent possible overheating of the CPU, do not block the cooling vents.
Page 43: Front With The Display Open
Front with the display open Screen Speaker Power button Keyboard Palm rest Primary control button System indicator panel The computer’s screen is a liquid crystal display (LCD) that provides clear, sharp images. For more information about viewing options, see The speaker lets you hear sounds, such as system alarms associated with your software, and music from DVD-ROMs and audio CDs.
Page 44: System Indicator Panel
Finding Your Way Around Front with the display open The 85-key keyboard provides all the functionality of a full- size keyboard. For more information, see keyboard” on page The front panel provides a palm rest to assist you in maintaining proper posture while using the computer. The primary and secondary control buttons below the TouchPad act like the buttons on a mouse, with primary and secondary functions.
Page 45: Keyboard Indicator Lights
determining remaining battery power, see battery power” on page The hard disk drive light flashes while the hard disk drive is being accessed. The disc/disk activity light flashes when the optional external diskette drive, or the DVD-ROM or multi-function drive is being accessed. Never turn off the computer while any drive is in use.
Page 46: Underside
Finding Your Way Around Underside instead of typing the letter printed on the top of the key. For more information, see page The numeric mode light, located on the panel just below the key, glows when the numeric overlay is on. When this light is on, pressing an overlay key types the white number printed on the key instead of typing the letter printed on the top of the key.
Page 47 Finding Your Way Around Underside The battery pack contains the battery. For information about replacing the battery, see “Changing the main battery” on page 122. The memory slot cover protects the two expansion memory slots where you insert additional memory. See “Installing additional memory (optional)”...
Page 48: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 49: Keeping Yourself Comfortable
❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 50 Getting Started Selecting a place to work twisting your torso or neck, and look at the screen without slouching. ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen.
Page 51 If you are using a conventional chair: ❖ Your knees should be slightly higher than your hips. If necessary, use a footrest to raise the level of your knees and ease the pressure on the back of your thighs. ❖ Adjust the back of your chair so that it supports the lower curve of your spine.
Page 52: Precautions
Getting Started Selecting a place to work ❖ Exercise your hands, wrists, and arms to improve circulation. Using the computer keyboard incorrectly may result in discomfort and possible injury. If your hands, wrists, and/or arms bother you while typing, stop using the computer and rest.
Page 53 too hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example), your skin might suffer low-heat injury. ❖ Never apply heavy pressure to the computer or subject it to sharp impacts.
Page 54: Setting Up Your Computer
Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards.
Page 55: Registering Your Computer With Toshiba
To register online, your computer’s modem must be connected to a voice-grade telephone line. If you chose not to register now, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. A window will display the message, “Thank you.”...
Page 56: Connecting To A Power Source
Getting Started Connecting to a power source Before starting to use your computer, you may also want to: ❖ Add more memory (see (optional)” on page ❖ Connect a mouse (see ❖ Connect a local printer (see page ❖ Install PC Cards (see ❖...
Page 57 Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter. When you connect the AC adapter to the computer, always follow the steps in the exact order as described in the User's Manual.
Page 58: Charging The Main Battery
Getting Started Charging the main battery Plug the AC adapter into the DC-IN on the back of the computer. Connecting the AC adapter to the computer Connect the power cable to a live electrical outlet. If the electrical outlet is live, the system indicator panel’s AC power light ( Damaged power cables can cause fire or electric shock.
Page 59: Using The Computer For The First Time
TECHNICAL NOTE: The battery does not charge while the computer is consuming full power. Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time. Continuing to charge a fully charged battery can damage the battery.
Page 60: Turning On The Power
Getting Started Using the computer for the first time To avoid damaging the display panel, do not force it beyond the point where it moves easily. Never lift or move the computer using the display panel. Small bright dots may appear on your TFT display when you turn on your computer.
Page 61: Using The Touchpad
The hard disk drive indicator flashes to indicate that the hard disk drive is currently in use. Never turn off the computer while any drive is in use. Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger.
Page 62: Control Buttons
Getting Started Using the computer for the first time Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession.
Page 63: Setting Up A Printer
Setting up a printer If you started your computer with a printer connected and turned on, it may have been detected automatically (Plug and Play). If this is not the case, then you must install the printer driver for the model of printer that is connected to your computer.
Page 64 Getting Started Using the computer for the first time Sample Add Printer Wizard Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section.
Page 65 Using the computer for the first time Click Next. The Add Printer Wizard prompts you to select your printer. From the list of manufacturers and printers, select your printer, then click Next. Select the port settings according to the instructions in your printer’s documentation and the port to which your printer is connected, then click Next.
Page 66: Installing Additional Memory (Optional)
Additional memory comes in various capacities (visit Toshiba’s Web site at are two memory slots. Your system may have both slots occupied. If you use the computer for a long time, the memory modules will become hot.
Page 67 Installing additional memory (optional) You need a standard Phillips no. 1 screwdriver to install a memory module. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. If you are adding memory after you have started to use the computer, begin at step 1, otherwise skip to step 2.
Page 68 Getting Started Installing additional memory (optional) Removing the memory slot cover Put the screw and the cover in a safe place so that you can retrieve them later. The following figure shows the inside of the memory compartment. Viewing the inside of the memory compartment...
Page 69 Installing additional memory (optional) Remove the memory module from its antistatic packaging. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer).
Page 70: Removing A Memory Module
Getting Started Installing additional memory (optional) Turn the computer over and reconnect any cables you removed. Turn on the computer. To verify that the computer correctly recognizes the memory, click Start, Control Panel and click Performance and Maintenance. Click System to view the recognized memory.
Page 71: Connecting A Mouse
Connecting a mouse You may want to use a mouse instead of the TouchPad, the computer’s built-in pointing device. To connect a USB mouse, plug the mouse cable into one of the USB ports. Connecting a printer You can connect a USB-compatible printer to your computer through the USB ports.
Page 72: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen. Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.
Page 73: Adjusting The Quality Of The External Display
The selections available are: ❖ Built-in display panel only ❖ Built-in display panel and external device simultaneously ❖ External device only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties box in the Control Panel. Adjusting the quality of the external display To obtain the best picture quality from your external display device, you may need to adjust the video settings.
Page 74: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive ❖ If the external video device, such as an SVGA monitor, is capable of displaying at a maximum resolution of 640 x 480 and your system is set for a higher resolution, only part of the desktop will appear on the screen.
Page 75: Using An External Keyboard
Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer provided that the keyboard is USB-compatible. To connect a keyboard, attach its cable to one of the computer’s USB ports. You can do this after you turn on the computer.
Page 76: Caring For Your Computer
Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings.
Page 77: Moving The Computer
You can purchase a carrying case from your Toshiba dealer or at Toshiba’s Web site at Using a computer lock You may want to secure your computer to a heavy object such as your desk.
Page 78 Getting Started Caring for your computer The computer is now securely locked to deter computer theft. Locking the computer...
Page 79: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 80: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to storage media on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 81: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable.
Page 82: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys ® ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows ❖ The Application key has the same function as the secondary TouchPad control button (or secondary mouse button).
Page 83 Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 84: Emulating A Full-Size Keyboard
Learning the Basics Emulating a full-size keyboard To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Emulating a full-size keyboard Although the computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. Pressing the of the specially marked keys allows you to emulate a full-size keyboard.
Page 85: Saving Your Work
Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using Standby mode. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low.
Page 86: Printing Your Work
Learning the Basics Printing your work Printing your work Verify that the Windows your printer as described in TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).
Page 87: Using The Dvd-Rom Or Multifunction Drive
Using the DVD-ROM or Multifunction drive Double-click the folder that contains the file, then click the file you want to copy. HINT: You can use the file. To select multiple consecutive files, hold down the key and click the first and then the last file (all files within that range will be highlighted).
Page 88: Dvd-Rom Drive Components
Learning the Basics Using the DVD-ROM or Multifunction drive For these reasons, your computer may come with a DVD- ROM or multifunction drive. HINT: Your DVD-ROM or Multifunction drive is designed to play region 1 (North America) DVD-ROMs. For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power.
Page 89: Inserting A Disc
Using the DVD-ROM or Multifunction drive The eject button requires power to operate. The manual eject button does not require power. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip.
Page 90 Learning the Basics Using the DVD-ROM or Multifunction drive Carefully place the disc in the empty tray with its label facing up. Inserting a disc Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction.
Page 91: Playing An Audio Cd
Using the DVD-ROM or Multifunction drive Close the disc tray by pressing gently on the center of the tray until it clicks indicating that it is locked. Playing an audio CD Insert an audio CD and close the disc tray. The computer automatically detects a disc in the drive and opens the Audio CD window.
Page 92 Learning the Basics Using the DVD-ROM or Multifunction drive The Windows Media Player window appears. Rewind Play Stop Previous track Next track Mute Sample Windows Media The Windows Media an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel.
Page 93: Viewing The Contents Of A Cd Or Dvd
Using the DVD-ROM or Multifunction drive Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files. You can use Explorer or My Computer to view the contents of any CD or DVD.
Page 94: Removing A Disc With The Computer Off
Learning the Basics Setting up for communications Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 95: Connecting The Modem To A Phone Line
RJ-11 telephone line. For more information regarding your computer’s modem, visit Toshiba’s Web site at pcsupport.toshiba.com. Attach one end of a standard RJ-11 telephone cable to the modem port. To locate the modem port, see Plug the other end of the RJ-11 telephone cable into the modular jack of a standard voice-grade telephone line.
Page 96: Powering Down The Computer
Learning the Basics Powering down the computer Click Network Setup Wizard or Network Connections. Enter the phone number of your network connection and let the program dial the number. The computer connects with the network. Powering down the computer Pushing the power button before shutting down the Windows operating system could cause you to lose your work.
Page 97: Restart Command
Factors to consider when choosing Turn Off or Shut down: ❖ No power is used while the computer is turned off. This is the most efficient mode if you will be away from your computer for an extended time. ❖ Restarting from Turn Off or Shut down uses the most time and battery power.
Page 98: Standby Command
Learning the Basics Powering down the computer ❖ Restarting from Hibernation mode uses a little more time and battery power than restarting from Standby because information is being retrieved from the hard disk instead of memory. ❖ When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using.
Page 99: Using Turn Off Or Shut Down
For more information about the Standby, see Standby” on page Standby mode more quickly, see more quickly” on page Using Turn Off or Shut down If you are using the Windows or are using the Windows not a member of a domain, power off the computer as follows: Click Start, Turn off computer.
Page 100: Turning Off Or Shutting Down More Quickly
To do so, you must preset the mode. Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. 103. “Using Hibernation”...
Page 101 You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console. See Console” on page 189. Sample TOSHIBA Power Saver Properties window Select the listed power option you desire—for example, Normal in the “Running on batteries” section.
Page 102 Learning the Basics Using Turn Off or Shut down Sample Normal Power Properties window Click the System Power Mode tab. Select Power Off for the options you want: ❖ When I press the power button Set this option to power off if you want the computer to turn off when you press the power button.
Page 103: Starting Again After Turn Off Or Shut Down
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Normal Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, press and release the power button.
Page 104: Enabling The Hibernation Command
The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Click the Hibernate tab, then click the Enable hibernate support check box. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel.
Page 105: Going Into Hibernation Mode
Going into Hibernation mode If you are using the Windows or are using the Windows not a member of a domain, power off the computer using the Hibernation command as follows: Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window with shift key held down to show Hibernate option Hold down the shift key and click Hibernate...
Page 106: Going Into Hibernation Mode More Quickly
Learning the Basics Using Hibernation Sample Hibernate computer window Select Hibernate from the drop-down list of options. Click OK. The computer saves the state of the system, including all open programs and files, to the hard disk. Then the computer turns itself off.
Page 107 Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console. See Console” on page 189. Sample TOSHIBA Power Saver Properties window In the Running on batteries area, click the Details button.
Page 108 Learning the Basics Using Hibernation Sample Normal Power Properties window Select Hibernation for the options you want: ❖ When I press the power button Set this option to Hibernation so that the computer will go into Hibernation mode when you press the power button.
Page 109: Starting Again From Hibernation Mode
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Normal Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button.
Page 110: Using Standby
Learning the Basics Using Standby Using Standby If you are using the Windows or are using the Windows not a member of a domain, power off the computer using the Standby command as follows: Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window Click Stand By.
Page 111: Going Into Standby Mode More Quickly
Sample Stand by window Select Stand by from the drop-down list of options. Click OK. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light blinks amber to indicate the machine is in Standby mode.
Page 112 Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console. See Console” on page Sample TOSHIBA Power Saver Properties window Click Details in the Running on batteries section.
Page 113 Click the System Power Mode tab. Sample Normal Power Properties window Select Standby for the options you want: ❖ When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button.
Page 114: Starting Again From Standby
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Normal Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Standby To start the computer from Standby mode, press the power button.
Page 115: Chapter 4: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 116: Battery Notice
For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power.
Page 117: Charging The Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at toshiba.com. Charging the main battery To charge the battery, plug the computer into a live wall outlet.
Page 118: Charging The Rtc Battery
Mobile Computing Charging the batteries The battery may not start charging immediately if: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 119: Monitoring Battery Power
To recharge the RTC battery, plug in the computer and leave it turned on until the RTC is fully charged. It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Page 120: Conserving Battery Power
Click Performance and Maintenance. Click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console. See Console” on page Choose the Power Save Modes tab, then under the Running on Batteries section, click Details.
Page 121: What To Do When The Battery Runs Low
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. What to do when the battery runs low When the battery runs low you can ❖...
Page 122: Changing The Main Battery
Click Performance and Maintenance. Click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console. See Console” on page Choose the Power Save Modes tab, then under the Running on Batteries section, click Details.
Page 123: Removing The Battery From The Computer
Removing the battery from the computer Save your work. Turn off the computer via the Start menu or place it in Hibernate mode according to the instructions in Hibernation” on page Remove all cables connected to the computer. Close the display panel and turn the computer upside down with the front side of the computer facing you.
Page 124 Mobile Computing Changing the main battery Releasing the battery While still holding the release latch in the open position lift the battery pack out of the computer. Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries safely”...
Page 125: Inserting The Battery In The Computer
Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. Inserting the battery in the computer Assuming you just removed the battery pack (see the battery from the computer”...
Page 126: Maximizing Battery Life
Before doing so, follow the steps below: Turn off the computer’s power. Disconnect the AC adapter and turn on the computer’s power. If it does not turn on, go to step 4. toshiba.com...
Page 127: Disposing Of Used Batteries Safely
Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the main battery light flashes or there is some other warning to indicate a low battery, go to step 4.
Page 128: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 129: Chapter 5: Getting To Know The Windows
Chapter 5 Getting to Know the Windows System This chapter introduces the Windows by guiding you through a few basic tasks. If you have used a Windows will find the Windows Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 130: Lesson 1: Exploring The Desktop
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 131 The icons initially displayed on your system desktop include: Toshiba Access—Opens a window with links to software updates, services and support, and other important benefits. Recycle Bin—Holds files you have deleted using the Windows Explorer.
Page 132: Windows ® Xp File System
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop ❖ Search for files ❖ Access Windows Help and Support Center ❖ Run programs ❖ Suspend system activity and shut down the computer For more information on starting programs, see Starting programs”...
Page 133: Lesson 2: Using The Touchpad And Control Buttons Together
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together the files and folders reside in your computer on a storage device, such as a disk drive. You can think of your computer storage system in terms of office equipment.
Page 134 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Click an empty area of the desktop to close the Start menu. With the pointer in an empty area of the desktop, click the secondary button (the right-hand button) to open the desktop shortcut menu.
Page 135 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Now click the Close button in the upper-right corner of this window. The operating system closes the My Computer window. If the taskbar is locked, you need to unlock it. To unlock the taskbar, place the cursor on the taskbar and click the secondary button.
Page 136: Lesson 3: Learning About The Internet
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet HINT: You can move the taskbar to any of the desktop’s four edges. Click the taskbar once again and drag it back to the bottom of the desktop. Lesson 3: Learning about the Internet This lesson demonstrates how to access a Web page from a window and from the taskbar.
Page 137: Lesson 4: Creating A New Document
Getting to Know the Windows ® XP Operating System Sample My Computer window Lesson 4: Creating a new document This lesson teaches you how to create a text file without having to first open a program. Move the pointer to an empty area of the desktop, then click the secondary button.
Page 138: Lesson 5: Creating A New Folder
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder Sample Notepad window Notice that when the document opens, there is a new button on the taskbar that reads My New Doc- Notepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Page 139 Getting to Know the Windows ® XP Operating System The operating system stores documents and programs in folders. It even stores other folders in folders. In this lesson, you will create a folder in which to store your new document. Move the pointer to an empty area of the desktop, then click the secondary button.
Page 140: Lesson 6: Starting Programs
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Lesson 6: Starting programs Usually, you will know which program you want to use for a particular task. This lesson teaches you how to launch programs from the Start menu, using two of the programs that are built into the ®...
Page 141 Getting to Know the Windows ® XP Operating System Click Windows Explorer. The operating system opens Windows provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk. Sample Windows Explorer window Notice the taskbar now has two buttons on it—one for Paint and one for Windows...
Page 142: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning windows so that you can see more than one of them at a time.
Page 143: Resizing And Moving Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the Minimize button at the top-right of the Explorer window to hide the window. Windows However, it is still open, as you can see from the taskbar. HINT: Minimizing program windows is a good way to clean up the desktop without actually closing programs.
Page 144 Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click and drag the edge of the window until it takes up just less than half the width of the desktop. Click the title bar of the Paint window and drag it to the left side of the desktop.
Page 145: Lesson 8: Closing Programs
Getting to Know the Windows ® XP Operating System Lesson 8: Closing programs Once you are finished working with a document or program, it is a good idea to close it. While you can run several programs at the same time, having a large number of programs and documents open simultaneously can slow down your computer.
Page 146: Creating A Shortcut To The Character Map
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Move the pointer to an empty area of the desktop, then click the secondary button. The operating system displays the desktop shortcut menu. Click New, then click Shortcut. The operating system displays the Create Shortcut dialog box.
Page 147 Getting to Know the Windows ® XP Operating System Sample Search options on the Start menu Click All Files and Folders. The operating system displays the Search Results dialog box. Sample Search Results dialog box Lesson 9: Creating shortcuts...
Page 148: Lesson 10: Changing The Screen Saver
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver HINT: Search also allows you to perform searches on the Internet. Type char and then click Search. The operating system displays a list of all the files with “char”...
Page 149 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver of these properties can be customized to meet your particular needs and tastes. DEFINITION: An object is an independent block of data, text, or graphics that was created by an individual application. This lesson introduces object properties by showing you how to change one of the properties of the desktop—the screen saver.
Page 150: Lesson 11: Setting The Date And Time
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Scroll through the screen saver options by clicking the scroll arrows in the list box. Try a screen saver pattern by clicking a name in the list box.
Page 151 Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Sample Date and Time Properties dialog box HINT: To open the Date and Time Properties dialog box more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date and Time, or double- click the time display.
Page 152: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Lesson 12: Removing objects from the desktop Earlier in this tutorial, you created a new icon on the desktop. Since everything you have done to this point has been just practice, you may want to return the desktop back to its original uncluttered state.
Page 153 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin open on the desktop To completely remove an object, select it, and then click File, Delete. The object is permanently deleted from the Recycle Bin. Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs.
Page 154: Lesson 13: Using System Restore
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. Click Yes to confirm that you are sure. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Page 155: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows ® XP Operating System The operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This lesson teaches you how to use some of the Help and Support features in Windows ®...
Page 156 Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? The Help and Support Center Index window pane appears. Sample Help and Support Center Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 157: Using The Online Tours And Tutorials
Getting to Know the Windows ® XP Operating System Sample Drawing help window Click the Paint link. The operating system opens the Paint program. Not every Help topic contains a hot link to start the program it is talking about. However, when you do encounter one, it provides a convenient way to start the program to look at it while you read about the program in the Help topic.
Page 158: Lesson 15: Turning Off Your Computer
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Click What’s new for Help and support. On the right pane, click Tours and articles. On the right pane, click Tour of Windows XP. Sample Help and Support Center window Lesson 15: Turning off your computer It is very important that you let the Windows system shut down your computer.
Page 159: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Page 160: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar—which resources to display for quick access ❖...
Page 161: Bringing The World To Your Desktop
Bringing the world to your desktop With the Windows desktop with complete World Wide Web integration at a single click. Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: Point to an empty space on the desktop and click the secondary button.
Page 162: Changing Desktop And Browsing Style
Exploring Your Options Personalizing your desktop To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
Page 163: Personalizing Individual Windows
Choosing a style To select desktop and browsing style options: Click Start, then click My Computer. The My Computer window appears. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options.
Page 164: Customizing Window Toolbars
Exploring Your Options Personalizing your desktop a regular basis. For example, using this Web integration feature you can monitor weather, game scores, stock prices, or headlines—all in the window of your choice. Customizing window toolbars You can display one or more customizable toolbars at the top of a window.
Page 165: Displaying Information About Each Folder
The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Page 166: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Open the folder you want to view as a Web page. In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK.
Page 167: Setting Up For Communications
You can connect an external USB-compatible keyboard and a USB-compatible mouse to one of the USB ports. For more information about connecting a mouse, see mouse” on page Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖...
Page 168: Connecting The Modem To A Telephone Line
Exploring Your Options Using your computer at the office Click the Modems tab. A location box appears. In the Attached to field, the COM port is specified. Make a note of the COM port number. To verify that the modem is set up properly, double-click the COM port to which your modem is connected.
Page 169: Exchanging Data With Another Computer
❖ Set up a home or small office network ❖ Set up an advanced connection Click Next and follow the directions on the screen. The computer connects to the network. Exchanging data with another computer To transfer a large amount of information between computers, you need a physical connection and a synchronization program.
Page 170: Setting Up A Wireless Connection
Accessing the wireless modules using your system tray The following information applies to systems with the optional Wi-Fi feature: To install the Wi-Fi option at a later time, contact your Toshiba Authorized Service Provider. When using your Wi-Fi Mini PCI module, your computer may display a Network Connection icon in the desktop’s...
Page 171: Connecting To The Internet
Connecting to the Internet To connect to the Internet you may need: ❖ A modem (one comes with your computer) ❖ A telephone line, DSL, a cable connection, or a satellite link ❖ A browser or communications program ❖ An Internet Service Provider (ISP) Once you have established an ISP account, you can access the Internet.
Page 172: An Overview Of Using The Internet
Exploring Your Options An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖...
Page 173: Internet Service Providers
Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection. You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and...
Page 174: Internet Features
Exploring Your Options An overview of using the Internet Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 175: Toshiba's Online Resources
You can also use the File Transfer Protocol (FTP) supported by a separate software program. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 176: Display Settings Hot Key
Exploring Your Options Changing the display properties setting Sample Display Properties dialog box Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 800 x 600, then click Apply. The screen blinks momentarily while the settings are adjusted.
Page 177: Exploring Audio Features
Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones or external speakers. Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone jack and using the Sound Recorder feature in the operating system.
Page 178: Adjusting Recording Settings
Exploring Your Options Exploring audio features Positioning Sample Sound Recorder screen Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 179: Using External Speakers Or Headphones
In the Audio Properties dialog box, adjust the Recording Volume and Preferred device. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 180: Pc Card Supporting Software
Exploring Your Options Using PC Cards Check the documentation that came with the PC Card to see if it conforms to the PCMCIA 2.1 standard, or later. Other cards may work with your computer, but are likely to be much more difficult to set up and use. PC Card supporting software PC Cards require Card and Socket Services software —...
Page 181: Removing Pc Cards
Inserting a PC Card To avoid damaging the PC Card or the computer, do not force the card into the PC Card slot. Removing PC Cards Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card.
Page 182: Hot Swapping
Exploring Your Options Using PC Cards Removing a PC Card Remove the PC Card and store it properly. Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.”...
Page 183: Chapter 7: Toshiba Utilities
TOSHIBA Power Saver ❖ Toshiba Hardware Setup TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 184 To open Accessibility: Click Start, then click All Programs. Select Toshiba Utilities, then select Accessibility. The TOSHIBA Accessibility window appears. Check the Use Fn-StickyKey box. Sample TOSHIBA Accessibility window Put a check mark next to the desired option.
Page 185: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse To access Fn-esse, click Start, All Programs, Toshiba Utilities and Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse keyboard Toshiba Utilities 145.
Page 186: Assigning A Key To A Program Or Document
Toshiba Utilities Fn-esse The keys are color-coded as follows: ❖ Available keys are white. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are dark gray.
Page 187 Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder. These are the items that appear in the popup list. Toshiba Utilities Fn-esse key, then press...
Page 188: Viewing Existing Key Assignments
Toshiba Utilities Hotkey utility ❖ To create a popup list with items from various folders, or to pick only a few items from a folder, create a new folder containing only the desired programs and documents. If you are unsure how to do this, refer to your operating system documentation.
Page 189: Toshiba Console
To activate the utility: Click Start, All Programs, Toshiba Utilities and then click Hotkey utility. The Toshiba Hotkey utility window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option. Click OK. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings.
Page 190: Customize Your Computer
Toshiba Utilities TOSHIBA Console Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. Sample TOSHIBA Console window The TOSHIBA Console offers the following features: ❖ Customize Your Computer ❖ Security Customize Your Computer The features available in this category are: ❖...
Page 191: Security
To access Power Management through the TOSHIBA Console: Click Start, then click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. Toshiba Utilities...
Page 192 You can either use one of the preset modes or create and use your own customized mode. The preset modes cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change...
Page 193 Plugged in section This section has a single preset power usage mode Power. You can create other AC power modes, but Toshiba recommends use of the preset Full Power mode. The windows and settings for creating and customizing battery power modes are described in the following sections.
Page 194: Toshiba Hardware Setup
Power Saver Properties window. You can change the name here if you wish. Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool. To access it: In the TOSHIBA Console, click the Toshiba Hardware icon. Sample TOSHIBA HWSetup window...
Page 195 The TOSHIBA HWSetup window appears with tabs for the following: ❖ Display — Allows you to select the built-in LCD and/or external monitor when the computer powers on. ❖ Boot Priority — Allows you to change the sequence in which your computer searches the drives for the operating system.
Page 196: Chapter 8: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 197 To close a program that has stopped responding: Press Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 198: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Press Enter describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power.
Page 199: The Windows ® Operating System Is Not Working
The Windows® operating system is not working The computer is not accessing the hard disk or the diskette drive. Your computer normally loads the operating system from the hard disk. If you have a hard disk problem, you will not be able to start the computer.
Page 200: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working For example: ❖ The operating system fails to start after the Windows XP ❖ The operating system takes a long time to start. ❖ The operating system responds differently from the normal routine.
Page 201: Internet Problems
The Windows® operating system is not working ❖ Directory Services Restore Mode (Windows domain controllers only) ❖ Debugging Mode ❖ Start Windows ❖ Reboot ❖ Return to OS Choices Menu See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode.
Page 202: The Windows Xp Operating System Can Help You
If Something Goes Wrong Resolving a hardware conflict ® The Windows XP operating system can help you If the operating system has started properly, but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem. To access Windows Click Start, then click Help and Support.
Page 203: A Plan Of Action
A plan of action The smooth operation of the system depends on the successful interaction of all devices, programs, and features. If the system or one of its attached devices is not working, resolving the problem can be time-consuming and frustrating. The recommended procedure for getting multiple devices to work together is to add and set up one device at a time.
Page 204 If Something Goes Wrong Resolving a hardware conflict access memory directly. If two or more devices use the same DMA, the data required by one device overwrites the data required by the other, causing a hardware conflict. Plug and Play With Plug and Play and the Windows avoiding hardware conflicts is easy.
Page 205: Fixing A Problem With Device Manager
Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 206 If Something Goes Wrong Resolving a hardware conflict To check a device’s properties: Click Start, Control Panel, Performance and Maintenance, Administrative Tools. Double-click the Computer Management icon. In the left pane, click Device Manager. To view the device(s) installed, double-click the device type.
Page 207: Memory Module Problems
Memory module problems Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer).
Page 208: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cable will neither power the computer nor recharge the batteries.
Page 209: Keyboard Problems
The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility.
Page 210: Display Problems
If Something Goes Wrong Resolving a hardware conflict Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press the .
Page 211 ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Make sure the display choice is not set for the built-in screen only. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 212: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Adjust the screen resolution and/or color quality. Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher.
Page 213 Right-click the drive you want to check and click Properties. The drive’s properties box appears. Click the Tools tab. Click the Check Now button. The Check Disk window appears. You can choose one or both options: ❖ Automatically fix file system errors ❖...
Page 214: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict You may be inserting the diskette incorrectly. Hold the diskette with the hub side facing down, and insert it so that the metal head window cover goes into the drive first. The metal cover or a loose label may be obstructing the path into the drive.
Page 215 You press the disc eject button, but the drive tray does not slide out. Make sure the computer is connected to a power source and turned on. The DVD-ROM or multi-function drive eject mechanism requires power to operate. To remove a disc without turning on the computer, use a narrow object, such as a straightened paper clip, to press the manual eject button.
Page 216: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Double-click the Secondary IDE Channel. The Secondary IDE Channel Properties window appears. Sample Secondary IDE Channel Properties window Click the Advanced Settings tab. Look at Device 0. The current transfer mode should be Ultra DMA Mode 2.
Page 217: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 218 If Something Goes Wrong Resolving a hardware conflict Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system.
Page 219 Double-click the appropriate category for the PC Card being used. Double-click the name of the PC Card device. The operating system displays your PC Card’s Properties window, which contains information about your PC Card configuration and status. The computer stops working (hangs) when you insert a PC Card.
Page 220: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 221: Modem Problems
Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. If Something Goes Wrong Resolving a hardware conflict 167. toshiba.com...
Page 222: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 223: If You Need Further Assistance
GO, and then clicking the Detailed Specs link from the menu on the left. Or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer, see contact” on page If Something Goes Wrong...
Page 224: Contacting Toshiba
Internet browser by typing To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 225: Other Toshiba Internet Web Sites
Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Czech Republic CHG Toshiba, s.r.o.
Page 226 800-457-7777 (within the US) 949-859-4273 (outside of the US - this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. Tel: 5249 6500...
Page 227 Ur. Quinta Grande 2720 Alfragide Portugal Slovakia HTC a.s. Dobrovicova 8 81109 Bratislava Slovakia Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich...
Page 228: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 229: Without A Password
Without a password key combination turns off the display and activates Fn + F1 instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password key combination turns off the display and activates Fn + F1 instant security.
Page 230: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Instant password security Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature.
Page 231: Power Usage Mode
Power usage mode This hot key displays the power usage pop-up win- dow and cycles through the battery save modes. The power usage modes in the operating system under battery power are: Long Life, Normal, High Power, DVD Playback and Presentation Sample power usage modes The power usage mode in the Windows system under AC power is Full Power only.
Page 232: Standby Mode
Hot Keys Standby mode Standby mode This hot key puts the computer into Standby mode. Sample Standby confirmation box ❖ A message box is displayed by default to confirm that the computer is going into Standby mode. This message box can be set so it does not display.
Page 233: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box Hibernation mode ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.
Page 234: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. ❖...
Page 235: Display Brightness
Display brightness Sample display brightness window Enabling a wireless device only if the Wi-Fi switch is in the on position. If your machine includes multiple internal wireless devices, the to switch between or disable those devices. Disabling or enabling the TouchPad This hot key enables/disables the TouchPad.
Page 236: Keyboard Hot Keys
Hot Keys Keyboard hot keys Keyboard hot keys and off. off. off. For more information, see This hot key turns the cursor control overlay on This hot key turns the numeric overlay on and This hot key turns the scroll lock feature on and “Overlay keys”...
Page 237: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 238: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 239 direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared gigabyte...
Page 240 Glossary PCMCIA SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 241 alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems.
Page 242 Glossary bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 243 color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 244 Glossary direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 245 driver — See device driver. DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs.
Page 246 — The physical components of a computer system. Compare software. Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 247 hot key — (1) A feature in which certain keys in combination with key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping —...
Page 248 Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 249 MS-DOS prompt — See system prompt. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. multi-function drive -- A DVD drive that can read and write to CD and DVD media.
Page 250 Glossary password — A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 251 read-only memory — See ROM. reboot — See boot, restart. removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
Page 252 Glossary software — See program. Compare hardware. Standby — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend —...
Page 253 Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 802.11b or 802.11a/b communication protocol to permit an Ethernet connection using wireless communication components.
Page 254: Index
Index AC adapter 56, 60 AC power light Accessories programs alarms 121, 122 low battery audio features avoiding injury battery alarms caring for changing charge not lasting 75, 117 charging conserving power disposal installing 45, 60, 119 light monitoring power power usage mode release latch release lock...
Page 255 inserting problem solving channels Character Map charging main battery RTC (real-time clock) battery checking device properties cleaning CD or DVDs computer click closing programs comfort chair lighting work habits command Shut down Turn Off commands Hibernate powering down Standby communications programs setting up system resources...
Page 256 Index date and time setting DC-IN desktop browsing style creating new icon creating shortcuts major features properties shortcut menu Start button system tray 132, 142 taskbar Device Manager checking properties disabling a device devices keyboard dial-up connection Dial-Up Networking Wizard Digital Subscriber Lines (DSL) disk activity light Disk Defragmenter...
Page 257 non-system disk or disk error 199, 214 problem with display settings/ current settings not working with hardware program has performed an illegal operation warning resume failure Error-checking expansion memory slot cover external diskette drive keyboard external monitor connecting not working external speakers FAT (File Allocation Table) files...
Page 258 Index icon desktop moving to desktop naming safety indicator panel keyboard inserting CDs and DVDs PC Cards installing main battery interference statement Internal mode Internet bookmarked site not found chat rooms connecting to news groups overview slow connection URL address not found Internet Service Provider (ISP) IRQ (Interrupt Request) jacks...
Page 259 modem determining COM port 42, 95 port problem solving resetting port to default settings upgrading modem, using monitor 72, 166 connecting not working port mouse connecting moving the computer multi-function drive cannot access disc drive tray will not open problems troubleshooting 133, 134 My Computer...
Page 260 PC Card inserted computer will not power up contacting Toshiba corrupted/damaged data files Device Manager disabling a device disk drive is slow display is blank external display not working...
Page 261 starting Web browsers properties recharging main battery RTC battery recording adjusting quality sounds Recovery Media 131, 152 Recycle Bin remaining battery power removing CDs and DVDs main battery PC Cards 142, 143 resizing windows Restart command restarting from Hibernate restarting from Standby restarting from Turn Off RTC (real-time clock) battery running the computer on battery power...
Page 262 Toshiba Internet Web sites Toshiba Accessories information TOSHIBA Console Toshiba Hardware Setup TouchPad using using with control buttons transferring files transferring information between computers traveling tips Turn Off restarting from...
Page 263 windows hiding repositioning 142, 143 resizing Windows Explorer Windows Help Windows Media Player Windows Standby Windows XP change date and time settings changing the screen saver closing programs creating a new folder creating a text file creating shortcuts desktop 155, 202 Help Help and Support problem solving...

This manual is also suitable for:

A10-s129 A10-s1291 A10-s169 A10-s1691 A10-s128 A15-s127 ... Show all

Toshiba A10-S100 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5: Getting to Know the Windows

Chapter 6: Exploring Your Options

Chapter 7: Toshiba Utilities

Chapter 8: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Quick Links

Related Manuals for Toshiba A10-S100

Summary of Contents for Toshiba A10-S100