4 Replacement Procedures
5. Turn the LCD module face up and remove the LCD panel (I) from the backlight unit
(H).
6. Turn the backlight unit (H) removed face down and remove two screws (D) and lamp
cover (J).
4-148
Downloaded from
www.Manualslib.com
NOTE: Wear finger sacks or gloves during the work not to soil or scratch the
LCD panel or backlight unit.
(H) Backlight unit
Figure 4-158 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (6)
NOTE: Be careful not to scratch or soil the sheets.
Screw loosening torque: 1.1kg•cm
(D) Screw
Figure 4-159 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (7)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
(H) Backlight unit
(J) Lamp cover
4.18 Fluorescent Lamp
(I) LCD panel
(D) Screw