Toshiba Satellite A10 Maintenance Manual page 358

4.18 Fluorescent Lamp
Assembling the 15.0 Inch SXGA+ Sharp Fluorescent Lamp
To assemble the 15.0 inch SXGA+ Sharp fluorescent lamp, follow the steps below and refer
to Figures 4-163 to 4-177.
1. Stick four double-sided tapes (N, O, P, Q) on the P-chassis.
2. Turn the backlight unit face down and install a new lamp unit (R) on the P-chassis.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
Do not make the P-chassis over this line.
(P)
(Q)
Figure 4-163 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (11)
manuals search engine
Standard for edge of P-chassis
0 to 1 mm
4 Replacement Procedures
(N)
(O)
4-151