Fan Module/Cooling Fin/Cpu - Toshiba Satellite A10 Maintenance Manual

4 Replacement Procedures
4.7
NOTE: If silicon grease has already been applied to the CPU and fan module, wipe
clean with a cloth and apply new silicon grease. The computer will not operate correctly
if the CPU is not firmly in contact with the fan module.
Removing the Fan Module/Cooling Fin/CPU
The following describes the procedure for removing the fan module/cooling fin/CPU (See
Figure 4-12 to 4-16).
1. Remove the following screws fixing the CPU cover and remove the CPU cover.
M2.5x5 THIN BIND
4-22
Downloaded from www.Manualslib.com

Fan Module/Cooling Fin/CPU

• M2.5x5
• M2.5x16
Figure 4-12 Removing CPU Cover
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
4.7 Fan Module/Cooling Fin/CPU
THIN BIND screw
THIN BIND screw
x2
x1
CPU Cover
M2.5x16 THIN BIND