2.4 System Board Troubleshooting
NOTE: The printer port LED outputs the status of an item in which an error is occurred.
If the printer port LED outputs "0Ch" and then halts, it indicates memory check of first
64KB is completed and an error occurred during initialization of vector.
Check 1
Check 2
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
If the following error codes are displayed, go to Procedure 5.
B0h, B1h, B2h, B5h, B6h, B3h, 00h, 01h, 02h, 03h, 04h, 05h, 06h, 07h, 08h, 09h,
0Bh, 0Ch, 0Dh, 0Eh, 0Fh, 10h, 11h, 12h, 13, 14h, 15h, 16h, 17h, 18h, 19h, 1Ah,
1Bh, 1Ch, 1Eh
If error code 0Ah is displayed, go to the following Sections:
Section 2.5 3.5" FDD Troubleshooting
Section 2.6 2.5" HDD Troubleshooting
manuals search engine
2 Troubleshooting Procedures
2-29