4 Replacement Procedures
Installing the Touch Pad
The following describes the procedure for installing the touch pad (See Figure 4-27).
1. Place the touch pad from the right side according to the guide pins.
2. Connect the touch pad flexible cable to PJ3201 on the system board.
3. Secure the touch pad with the following screw.
4-40
Downloaded from
www.Manualslib.com
•
M2.5x5
THIN BIND screw
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
x1
4.11 Touch Pad