4.18 Fluorescent Lamp
4.18.5 Replacing the 14.1 Inch XGA LG.Philips Fluorescent Lamp
The following describes the procedure for replacing the fluorescent lamp (See Figure 4-82 to
Figure 4-89).
Removing the tape and cover shield
1. Remove the adhesive tape fixing the B/L cable (1). Be careful not to apply excessive
2. Remove the adhesive tape (Yupo paper) fixing the top case (2).
3. Remove the cover shield (C) (3). Be careful not to apply excessive force to the LCD
4. Remove the cover shield (G) (4). Be careful not to apply excessive force to the TCP.
5. Remove the adhesive tape fixing the top case (5, 6). During this step, be careful not to
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
force to the B/L cable.
controller. Wear anti-static gloves as much as possible to prevent circuit damage
caused by ESC.
apply excessive force to the top case.
Figure 4-82 Replacing 14.1 Inch LG.Philips fluorescent lamp (1)
manuals search engine
4 Replacement Procedures
4-93