Fluorescent Lamp - Toshiba Satellite A10 Maintenance Manual

4 Replacement Procedures
4

4.18 Fluorescent Lamp

This system uses LCD modules from the following suppliers. The procedure for replacing the
fluorescent lamp is different for each LCD module. Refer to the appropriate procedure.
14.1 inch
(XGA)
15.0 inch
(XGA)
15.0 inch
(SXGA+)
NOTE: - When working with a LCD module, always use a flat, grounded table.
(1) Handle the backlight unit in the environment without dust, such as on the clean
bench. Keep the worktable free from any screws or other material that may scratch
the LCD surface.
(2) Use an anti-static or protective sheet.
(3) When replacing the FL unit, cover with a finger protector or similar to prevent
dirtying or scratching the LCD panel.
(4) Take care when handling the lamp. Excessive force may break the lamp.
(5) Take care not to dirty or deform the lamp reflector.
(6) Ensure always that the power of the LCD module is turned off before connecting or
disconnecting cables and connectors.
4-64
Downloaded from www.Manualslib.com
Type Part No.
G33C00012110
G33C00013110
VF2093P01
VF2058P01
VF2048P01
VF2062P01
G33C0000G110
G33C0000L110
G33C0000Q110
G33C0000M110
G33C0000R110
G33C0000N110
G33C0000P110
manuals search engine
Supplier
TMD
TMD
CHIMEI
Samsung
Samsung
LG.Philips
LG.Philips
Samsung
Sharp
CHIMEI
LG.Philips
Samsung
Sharp
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
4.18 Fluorescent Lamp
Section
4.18.1
4.18.1
4.18.2
4.18.3
4.18.4
4.18.5
4.18.6
4.18.7
4.18.8
4.18.9
4.18.10
4.18.11
4.18.12