4 Replacement Procedures
Installing the tape and the cover shield
1. Stick the adhesive tape for fixing the B/L cable (1). Be careful not to apply excessive
2. Stick the adhesive tape (Yupo paper) for fixing the top case (2).
3. Remove the cover shield (C) (3). Be careful not to apply excessive force to the LCD
4. Install the cover shield (G) (4). Be careful not to apply excessive force to the gate
5. Stick the adhesive tape for fixing the top case (5, 6). Be careful not to apply excessive
4-100
Downloaded from
www.Manualslib.com
force to the B/L cable.
controller. Wear anti-static gloves as much as possible to prevent circuit damage
caused by ESC.
TCP.
force to the top case.
Figure 4-89 Replacing 14.1 Inch LG.Philips fluorescent lamp (8)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
4.18 Fluorescent Lamp