4.18 Fluorescent Lamp
Checking the backlight
1. Inspect the replacement backlight according to Figure 4-51.
he frame must not be
verlaid with the prism
プリズムシート類が
フレームに
heet, etc.
乗り上げていないこと。
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
The sheet must not be
dislocated from the frame.
シートがフレームからはずれていないこと。
The sheet must not be
dislocated from the frame.
シートがフレームからはずれていないこと。
The sheet must not be
dislocated from the frame.
シートがフレームからはずれていないこと。
A
Figure 4- 51 Replacing 14 Inch TMD fluorescent lamp (7)
manuals search engine
4 Replacement Procedures
The frame must not be
overlaid with the prism
プリズムシート類がフレームに
sheet, etc.
乗り上げていないこと。
Sheet retaining tape
シート押えテープ
Align the tape with the rib of frame.
フレームのリブに突きあてて貼る
The frame must not be overlaid.
乗り上げないこと
The frame must not be
overlaid with the sheet.
シートがフレームに乗り上げないこと
4-71