4.29 Fluorescent Lamp
4.29.3 Replacing the 15.4-inch WXGA Samsung Fluorescent Lamp
Disassembling the 15.4-inch WXGA Samsung Fluorescent Lamp
To disassemble the 15.4-inch WXGA Samsung fluorescent lamp, follow the steps below and
refer to figures4-70 to 4-74.
1. Remove the PCB cover and COF cover.
2. Remove the lamp wire tape and Al tape.
NOTE: Be careful not to damage the COF of S/D or G/D ICs.
Figure 4-70 Replacing Samsung fluorescent lamp (WXGA) (1)
Satellite M30-35 Maintenance Manual (960-455)
PCB cover
Lamp wire tape
Al tape
4 Replacement Procedure
COF cover
4-97
Need help?
Do you have a question about the SATELLITE M30-35 Series and is the answer not in the manual?
Questions and answers