Toshiba Satellite A10 Maintenance Manual page 178

3.25 Floppy Disk Drive Utilities
3. COPY program
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
(a) When COPY is selected, the following message appears:
FLOPPY DISK FORMAT & COPY : VX.XX
Type select (0:2DD,3:2HD) ?
(b) Select a drive type number. Selecting
the one below. Select a media type number.
2HD media mode (1:1.20MB, 2:1.44MB)
(c) The following message will appear:
Insert source disk into drive A:
Press any key when ready.
(c) Remove the Diagnostics Disk from the FDD, insert the source disk and press
any key. The following message will appear, indicating the program has
started.
[ FD TYPE ] : TRACK
[ FD TYPE ] : HEAD
[ FD TYPE ] : SECTOR
Copy start
(d) Remove the source disk from the FDD, insert a formatted work disk and press
any key. The following message will appear and start copying to the target
disk.
Insert target disk into drive A:
Press any key when ready.
(e) When the amount of data is too large to be copied in one operation, the
message from step (c) is displayed again. After the floppy disk has been
copied, the following message will appear:
Copy complete
Another copy (1:Yes/2:No) ?
(f) To copy another disk, type 1 and the message from step (a) is displayed again.
Entering 2 returns the test program to the DIAGNOSTIC MENU.
manuals search engine
3 and Diagnostics
will display a message similar to
3:2HD
= XXX
= X
= XX
[[ track,head = XXX X ]]
[[ track,head = XXX X ]]
3-63