Apx. G BIOS/KBC/EC Update
Apx. G
BIOS Rewrite Procedures
Appendix G BIOS/KBC/EC Update
To update the BIOS, KBC or EC, insert the FD for update into the FDD. Then turn on the
power of the computer while pressing the following key until the power LED blinks.
When the update is completed, the message will appear and the beep will sound. Then the
power of the computer is turned off.
Make sure of the update using the T&D.
NOTE: Do not turn off the power of the computer during update. Otherwise the
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
For BIOS update:
For KBC or EC update:
computer may not start again.
manuals search engine
~
(tilde key)
Tab
Appendices
G-1