Toshiba Satellite A10 Maintenance Manual page 364

4.18 Fluorescent Lamp
8. Install the bezel (E) on the lamp cover. Attach four latches on the lamp cover and two
(2) Lean the bezel on the lamp cover
without interference with the TCP.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
latches on the P-chassis.
(E) Bezel
Figure 4-172 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (20)
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating of the bezel and the latch of
the P-chassis.
Figure 4-173 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (21)
manuals search engine
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
Make sure of mating of the bezel
and the latch of the P-chassis.
4 Replacement Procedures
< Side view >
Hook
(Lamp cover side)
4-157