Toshiba Satellite A10 Maintenance Manual page 179

3 and Diagnostics
4. DUMP program
3-64
Downloaded from www.Manualslib.com
(a) When DUMP is selected, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a drive type
If is selected, the following message appears:
1:FDD
Select drive number
(c) Select a drive number and the following message will be displayed. Select a
format type.
Format type select (1:2DD, 3:2HD) ?
(d) If is selected, the following message appears. Select a media mode.
2:2HD
2HD media mode (1:1.20MB, 2:1.44MB, 3:1. 23MB) ?
(e) Select a format type and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(f) Insert a source disk and press any key and the following message will appear:
---Max. address ---
[ Track ] = XXXX
[ Head ] = XXX
[ Sector] = XX
Track number ????
(g) Set the track number, the head number and the sector number you want to
dump. The system will access the disk and dump a list. Then the message
shown in (k) will appear.
(h) The following message will appear when selecting
Select drive number
(i) Select a drive number and the following message will be displayed.
---Max. address ---
[LBA ] = XXXXXXXXX
LBA number ????????
(j) Set the LBA number you want to dump. The system will access the disk and
dump a list.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
number. If 2:HDD is selected
(1:A, 2:B) ?
(1:C, 2:D) ?
3.25 Floppy Disk Drive Utilities
, the display will go to step (h).
in (a).
2:HDD