4 Replacement Procedures
4.18 Fluorescent Lamp
Assembling the 15.0 Inch XGA Sharp Fluorescent Lamp
To assemble the 15.0 Inch Sharp XGA fluorescent lamp, follow the steps below and refer to
figures 4-117 to 4-129.
1. Stick the four double-sided tapes (N, O, P, Q) on the P-chassis.
Standard for edge of P-chassis
Do not make the P-chassis over this line.
(P)
(N)
0 to 1 mm
(O)
(Q)
Figure 4-117 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (11)
4-120
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
manuals search engine