Toshiba Satellite A10 Maintenance Manual page 88

2.4 System Board Troubleshooting
LED status
27h
28h
29h
2Ah
FFh
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
Table 2-5 Printer port LED resume mode error status (4/4)
Test item
Waiting for the completion of recovery of
VGA register
Recovery of PIT register
Recovery of PCI configuration register
Recovery of PIC MASK
Executing of driver for RESUME
Waiting for the completion of recovery of
FDD
Turns the power off if required during
Hibernation.
Checks if the power-off switch is
pressed or not during resume
processing/
Executes HOTKEY F1 when booting
in instant security
Clears key buffer
Clears IRT status.
(In ACPI mode)
Clears flag in Resume process
Acquires Wake Up Vector address.
Clears key buffer.
Renewal of date/time
ACPI mode on
Recovery of write-protected status
before.
(In ACPI mode / not in ACPI mode)
Initializing printer port
Returning to the main process
manuals search engine
2 Troubleshooting Procedures
Contents
(models supporting built-in FDD)
(Suspends if pressed.)
(Not in ACPI mode)
(In ACPI mode)
2-37