Replacing The 15.0 Inch Sxga+ Lg.philips Fluorescent Lamp - Toshiba Satellite A10 Maintenance Manual

4.18 Fluorescent Lamp
4
4.18.10
CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to
avoid contaminating or damaging the LCD module. Be careful not to let dust or other
foreign substances into the LCD module.
Disassembling the 15.0 Inch SXGA+ LG.Philips Fluorescent Lamp
To disassemble the 15.0 inch SXGA+ LG.Philips fluorescent lamp, follow the steps below
and refer to figures 4-136 to 4-139.
1. Remove the outside tape and cover shield.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com

Replacing the 15.0 Inch SXGA+ LG.Philips Fluorescent Lamp

1) Remove the adhesive tape fixing the B/L wire. Be careful not to apply
excessive force to the B/L wire.
2) Remove the cover shield (G). Be careful not to apply excessive force to the
gate TCP.
3) Remove the cover shield (C). Be careful not to apply excessive force to the
source PCB.
CAUTION: Wear anti-static gloves to prevent circuit damage caused by ESC.
4) Remove the tape shield and adhesive tape fixing the top case. Be careful not to
apply excessive force to the top case.
Adhesive tape
Adhesive tape
Figure 4-136 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (1)
manuals search engine
Cover shield (C)
Cover shield (G)
Tape shield
4 Replacement Procedures
4-133