Installing The Handset - Ricoh J-P2 Service Manual

17 January, 2003

1.6.5 INSTALLING THE HANDSET

[D]
[C]
NOTE: The optional handset is for the U.S. model only.
1. Remove the thumb screw [A] on the left spacer.
2. Install the handset bracket [B] on the left arm (! x 2, 1 thumb screw).
3. Install the handset holder [C] on the bracket ((! x 2).
4. Place the handset [D] with the handset cord resting on the cord holder [E] of
the bracket.
5. Attach the cord holder [F] (enclosed as accessories for the optional fax unit) to
the uppermost end of the front side of the left side stand.
NOTE: Attached to this position, the cord holder prevents the duplex unit and
the upper left cover from catching the handset cord when they are
closed. The holder can be ineffective if attached to a lower position.
6. Connect the handset cord to the jack.
[E]
[B]
1-31
OPTIONAL UNIT INSTALLATION
[F]
[A]
G307I114.WMF