Ricoh J-P2 Service Manual page 258

Table of Contents

Advertisement

PRINTER ENGINE SERVICE MODE
7
(Class 1, 2, and 3)
808
[Counter Clear]
NOTE: For more information, see "NOTE 1" following this table.
1
Counter Clear
[Access Code Clear]
810
1
Access Code Clear
816
[Tray Clear] Paper Tray Counter Clear
1
Tray 1
2
Tray 2
3
Tray 3/LCT
4
Tray 4
5
BypassTray
6
Duplex
822
[Co. Clear: Mag.] Counter Clear :Magnification
1
Co. Clear: Mag.
825
[Counter Reset]
1
Counter Reset
832
[Diag. Result] Diagnostic Result
1
Diag. Result
833
[Coverage] Pixel Coverage Ratio
1
Last [K]
2
Last [C]
3
Last [M]
4
Last [Y]
5
Average [K]
6
Average [C]
7
Average [M]
8
Average [Y]
Mode No.
CF
CF
*CTL Displays the result of the diagnostics.
*BCU
Function / [ Setting ]
Clears all counters.
Use to clear the access code if the customer
forgets the code (password).
Clears the counters (SP7-204) for the number of
sheets fed from the paper feed stations.
NOTE: The LCT is counted as the 3rd feed
station.
Clear the copy counters classed by magnification
mode (SP7-301).
Rests the total counter values to "0".
NOTE: This SP mode can be done only once,
while the counter values are less than 0.
Displays the image coverage ratio for each color
of the last output.
[ 0 to 100.00 / - / 0.01 %/step ]
This SP mode displays the "coverage ratio" of the
output, i.e. the ratio of the total pixel area of the
image data to the total printable area on the
paper. Note that this value is not directly
proportional to the amount of toner consumed,
although of course it is one factor that affects this
amount. The other major factors involved include:
the type, total image area and image density of
the original, toner concentration and developer
potential.
Displays accumulated average value of image
coverage ratio for each color.
[ 0 to 100.00 / - / 0.01 %/step ]
SP 7-833-5 to -8 vs SP 7-908-1 to –4
The averages for K (SP 7-833-5 and SP 7-908-1)
are the same.
For CMY, SP 7-908 does not include black-and-
white pages in the middle of a colour job.
However, SP 7-833 does include these pages in
the average. As a result, the readings of SP 7-833
will be lower, because these averages include
pages for which there is zero for CMY, but the
averages calculated for SP 7-908 do not include
these pages.
5-70
17 January, 2003

Advertisement

Table of Contents
loading

This manual is also suitable for:

G080

Table of Contents