Remarks - Ricoh J-P2 Service Manual

17 January, 2003

5.1.2 REMARKS

Display on the Control Panel Screen
Since the maximum number of characters which can be displayed on the control
panel screen is limited (14 characters), the description of SP modes displayed on
the screen needs to be abbreviated. The following are the major abbreviations
used for the SP modes for which the full description is over 14 characters.
Paper Type
N: Normal paper
TH: Thick paper
Color Mode [Color]
[K]: Black in B&W mode
[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode
[YMC]: Only for Yellow, Magenta, and Cyan
[FC]: Full Color mode
[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or Cyan in full
color mode
Paper Feed Station
P: Paper tray
B: By-pass table
Fusing Section
H: Heating roller
P: Pressure roller
Print Mode
S: Simplex
D: Duplex
Process Speed
62.5, 125, 185
As shown in the following table, the process speed (mm/s) depends on the print
mode (B&W or Color), resolution, and/or type of paper selected. Some SP mode
settings depend on the process speed.
Resolution
Mode
(dpi)
600 x 600
1,200 x 600
B/W
1,200 x 1,200
600 x 600
1,200 x 600
Color
1,200 x 1,200
600 x 600
OHP/Thick 1,200 x 600
1,200 x 1,200
Line speed Print speed
(mm/s) (ppm)
185 38
125 28
125 28
62.5 14
62.5 10
5-3
SERVICE PROGRAM MODE